Free no-obligation quotes. Send us photos on WhatsApp

Bath and North East Somerset · BA3

Electricians in Radstock

Extra sockets, lighting, extractor fans and kitchen or bathroom circuits, with the cable routes planned around solid walls and original wiring.

Rated Excellent on Rated People

Electrical Work in Radstock

Looking for an electrician in Radstock usually means one of two things: you want more sockets and better lighting, or you are fitting a kitchen or bathroom and need the wiring to match. Either way, the first question is what is already there. Radstock’s terraces have often been added to piece by piece over the years, and estate houses can still be running on their original wiring and a small consumer unit.

Electrical work in homes in England has to meet Building Regulations Part P and BS 7671, and Building Control at the council is the place to check what has to be notified for a given job. We confirm exactly what applies to your job when we quote. The work itself is practical: which circuit feeds what, where protective devices such as RCDs sit, and how a cable gets from the board to a new socket without chasing through a solid wall.

Because one person is doing the kitchen fit, the plumbing and the wiring, nothing is left for someone else to find out about. Message us a photo of your consumer unit, the room, and a list of what you would like added. We will say what looks involved and send a free, no-obligation quote.

Everything included in electrical work

Watch

How we approach electrical work

A 37-second look at the way we work, from our base in Frome to homes in Radstock and the villages around it.

In this video

  • Lights, sockets, fans, alarms
  • Planned with the whole room
  • Part P and BS 7671 explained
Watch full size and read the transcript

Homes in Radstock

Electrical Work in Radstock: what we look out for

Victorian & Edwardian terraces
Solid walls and old plaster make hidden cable runs difficult in a Radstock terrace, so routes tend to go under floorboards, up through lofts, or into neat surface trunking where chasing is not sensible. The existing wiring is often a patchwork of additions made over many years, so we look at what is behind each socket before promising an extra one. Timber floors make routing cables upstairs easier than downstairs.
1950s–70s estate homes
Estate homes from the 1950s to 1970s have simple layouts but ageing electrics: few sockets, a small board and wiring that predates modern kitchens. Before adding a circuit for an oven, hob or shower we check what the board can carry and whether it has RCD protection. Brick and block walls and concrete floors mean chasing has to be careful, and in small kitchens the socket positions need as much thought as the lights.
Stone cottages & farmhouses
Thick stone walls are tough to chase and often damp, so cables usually go through floor voids, lofts or surface conduit instead of being buried. Fittings in damp or cold rooms need to suit the conditions, and low ceilings limit downlight choices. If an outbuilding or garden light is on your list, mention it, because outdoor circuits need RCD protection and a cable route that is properly protected.

Planning in Radstock

What to plan for with electrical work in Radstock

  • Find out what your board can carry

    The consumer unit is the heart of any job. It decides how many new circuits can be added and whether they get RCD protection. Photograph yours, with the cover lifted if it opens easily, and note how many circuits it has. A kitchen refit with an oven, hob and dishwasher might show that the board, not the cables, needs attention.

  • Cable routes through solid walls

    In solid walls, every new socket means chasing, trunking or a route round the back. We plan the route before anything is bought, favouring lofts, floor voids and the thickness of existing wall finishes. Tell us which walls are solid or newly plastered, and if you want surfaces left clean, because that decides whether trunking is acceptable.

  • Bathroom zones and notification

    Bathrooms have zones around the bath and shower that limit which fittings can go where, and extractors and lights have to suit the damp. Some alterations, including new circuits in kitchens and bathrooms, can have to be notified to Building Control, so check with the council about your particular job. We will say what applies when we quote.

What customers say

Real reviews from real homeowners

“Pleasant polite tidy, carried out work quickly and efficiently”
Mrs Jill, BA2Verified · October 2025
“I would highly recommend Krzysztof he was professional, good time keeper and took pride in his work very pleased with the finished Bathroom makeover”
Sarah, BA5Verified · May 2025
Read all reviews on Rated PeopleSee our Google reviews

Written reviews are copied word for word from our public Rated People profile. The Google rating comes from our public Google Business Profile.

Getting started

Getting a electrical work quote in Radstock

  1. 1Message us on WhatsApp with photos, rough measurements and what you would like done.
  2. 2We ask anything else we need and give you a free, no-obligation quote. Larger jobs usually need a visit first.
  3. 3You agree the plan and we book you in. One person, one point of contact, start to finish.
What affects the price of electrical work
Loading map…
  • Our base in Frome
  • Main areas
  • Local villages
  • Also covering

Questions

Electrical Work in Radstock: FAQs

Can you add sockets to a solid-walled room without wrecking the decoration?

Often, with planning. We look for routes from the floor void, loft or neighbouring room that avoid chasing through the wall, and use neat trunking where chasing is not sensible. Sometimes the plaster has to be cut and made good, and we say so up front. Send photos of the room, with the wall where you want the socket, and we will suggest the route.

My house still has an old fuse box. Does it need replacing?

Not automatically, but an old board is worth having looked at. Older boards often lack RCD protection and have little spare capacity for a modern kitchen. What is needed depends on the condition of the wiring and the work you are planning. We assess it when we visit and tell you what we would change and what could wait.

Does a new kitchen circuit or an extractor fan need Building Control?

It can. Electrical work in homes in England must meet the Building Regulations, and some work, including new circuits, has to be notified. The rules turn on the job, so check with the council’s Building Control, and we confirm exactly what applies to your job when we quote. Tell us what you plan and in which room.

Free, no-obligation

Get your free quote

The quickest route to an accurate price is a WhatsApp message with photos. The more you can tell us, the more precise we can be.

  • A few photosThe room as it is now, from the corners, plus anything awkward like pipes, windows or radiators.
  • Rough measurementsWall lengths are plenty to start with. We will confirm exact sizes before ordering anything.
  • What you wantWhat stays, what goes, any products you have already chosen, and when you would like it done.

hello@fixedandfitted.co.uk

Tell us about the job

We will move it straight into WhatsApp so you can add photos and measurements.

We use your details only to reply to your enquiry and to quote for the work. See our privacy policy.