Free no-obligation quotes. Send us photos on WhatsApp

Somerset · BA11

Plumbers in Frome

Plumbing jobs in Frome homes, from leaks and tired valves to new bathroom and kitchen pipework, routed with the stone, floors and hard water in mind.

Rated Excellent on Rated People

Plumbing in Frome

Looking for a plumber in Frome usually means one of two things: something is leaking, or something is about to be moved. Either way the job is mostly about routes. Where does the pipe go, what is it buried in, and can it be got at again? Houses here are built from thick stone and old timber, and neither is generous with space for new pipework.

Water in this part of Somerset is hard, and scale builds up inside old taps and valves until they seize. That is why tired isolation valves are worth replacing the moment a section is drained. We think about waste as much as supply. A basin or sink only works if the waste has a steady fall to the stack, and in a solid floor or a stone wall, that fall is the hardest thing to find.

Pipes in lofts, outbuildings and cold lean-tos are the ones that freeze, so tell us about them. For leaks, a few photos of the stain and the pipework nearby help us work out where to start. Message us on WhatsApp for a free, no-obligation quote.

Everything included in plumbing

Watch

How we approach plumbing

A 31-second look at the way we work, from our base in Frome to homes in Frome and the villages around it.

In this video

  • No job too small
  • Every joint checked
  • Taps, WCs, radiators, wastes
Watch full size and read the transcript

Homes in Frome

Plumbing in Frome: what we look out for

Stone cottages & farmhouses
Running pipe through thick stone means a core drill or a lot of chasing, so we usually go under floors, through loft spaces and up boxed corners instead. In cottages, supply and waste often enter at odd heights, and some properties are on private drainage, so mention it when you message. Pipes in outbuildings and cold rooms are wrapped and kept off outside walls to keep them from freezing.
Victorian & Edwardian terraces
Terraces tend to have pipes under timber floors, notched through joists and boxed into corners. A damp patch on a ceiling can be a metre or more from the leak itself, so tracing takes patience. The stopcock is sometimes hidden under the stairs or in a cellar, and the waste stack may be old cast iron. We find these before we cut anything open.
1950s–70s estate homes
Estate houses are usually plumbed to a standard layout around an airing cupboard, so routes are easy to follow. The fittings, though, have been in for decades. Taps weep, radiator valves seize and isolation valves refuse to close, so we test them before starting and replace them in one visit when a section is already drained. Copper and plastic can be joined with the right fittings.
Modern & new-build homes
Newer homes use plastic pipe with push-fit joints hidden behind stud walls, boxing and floor voids. Leaks usually start at a joint, so we look at the accessible connections and any access panels before opening up. Pipe positions are tight, so replacement taps, basins and radiators are chosen to line up with what is already there, rather than moving pipes in the wall.

Planning in Frome

What to plan for with plumbing in Frome

  • Find your stopcock before you need it

    Whatever the job, the first question is how to turn the water off. In older Frome houses the stopcock can be under the stairs, in a cellar or buried in a cupboard, and it may not have been turned in years. We find it, test it and, if it is stiff or furred with scale, say so before the day we need it to shut.

  • Waste pipes need a fall

    Supply pipes can bend almost anywhere, but waste needs a steady slope to the stack or drain. That limits how far a basin, sink or shower can move from its present spot, especially across a solid floor or through a stone wall. We check the fall before agreeing a new position, and say so if a move is not practical.

  • Pressure, flow and old fittings

    Before choosing a new shower, mixer or tap, we check the pressure and flow at the outlet, because older supplies can be modest and a fitting that suits one house will dribble in the next. Furred valves and corroded joints near the work are replaced while the section is drained, so that pipe is not disturbed again next year.

What customers say

Real reviews from real homeowners

“Pleasant polite tidy, carried out work quickly and efficiently”
Mrs Jill, BA2Verified · October 2025
“I would highly recommend Krzysztof he was professional, good time keeper and took pride in his work very pleased with the finished Bathroom makeover”
Sarah, BA5Verified · May 2025
Read all reviews on Rated PeopleSee our Google reviews

Written reviews are copied word for word from our public Rated People profile. The Google rating comes from our public Google Business Profile.

Getting started

Getting a plumbing quote in Frome

  1. 1Message us on WhatsApp with photos, rough measurements and what you would like done.
  2. 2We ask anything else we need and give you a free, no-obligation quote. Larger jobs usually need a visit first.
  3. 3You agree the plan and we book you in. One person, one point of contact, start to finish.
What affects the price of plumbing
Loading map…
  • Our base in Frome
  • Main areas
  • Local villages
  • Also covering

Questions

Plumbing in Frome: FAQs

Can you move a sink or basin in a house with thick stone walls?

Usually, yes, but the route changes. Instead of chasing through the stone, new supply and waste pipes go under the floor, up through a cupboard or along a boxed-in corner. The waste still needs a steady fall to the stack, so the answer depends on how far the move is. Photos of the wall and the floor underneath tell us a lot.

Why is there a stain on my ceiling when the leak seems to be somewhere else?

Water travels along joists and pipes before it shows, so a stain can sit a metre or more from the leak. In older houses with timber floors, the likeliest causes are a weeping joint, a bath or shower seal or a failed waste connection. Turn off the supply if it is active and send photos of the stain and the room above.

Is it worth replacing taps and valves that are furred with limescale?

Usually, yes, particularly if the valve will not close fully or the tap drips. Scale from hard water jams the working parts, and a valve that has not moved for years can snap when forced. If a section is already drained for other work, replacing tired valves in the same visit is sensible and saves a second shutdown.

Free, no-obligation

Get your free quote

The quickest route to an accurate price is a WhatsApp message with photos. The more you can tell us, the more precise we can be.

  • A few photosThe room as it is now, from the corners, plus anything awkward like pipes, windows or radiators.
  • Rough measurementsWall lengths are plenty to start with. We will confirm exact sizes before ordering anything.
  • What you wantWhat stays, what goes, any products you have already chosen, and when you would like it done.

hello@fixedandfitted.co.uk

Tell us about the job

We will move it straight into WhatsApp so you can add photos and measurements.

We use your details only to reply to your enquiry and to quote for the work. See our privacy policy.